Test 1 - Lucent Technologies PARTNER Voice Messaging PC Card Release 2 Installation And Programming

Checking Your System's Operation

Test 1

Make an internal call to the ports that have been assigned to the VMS Hunt
Group by doing the following:
1. Press i78 . See "Expected Result." Hang up and go to Step 2.
2. Press i79 . See "Expected Result."
3. Press i777 . See "Expected Result."
Expected Result:
You should hear the following:
"Please enter extension and #."
Problem Resolution:
If you do not hear the correct system response, verify that extensions 78 and 79
have been assigned to Hunt Group 7 (#505).
Test 2
If the VMS Hunt Group Schedule for the communications system (or line
on the PARTNER ACS Release 3.0 or later) is set for Always, the
communications system can be in either Day Mode or Night Service.
If the VMS Hunt Schedule for the communications system (or line on the
PARTNER ACS Release 3.0 or later) is set for Day Only, put the
communications system into Day Service, and follow the procedure below.
If the VMS Hunt Schedule for the communications system (or line on the
PARTNER ACS Release 3.0 or later) is set for Night Only, put the
communications system into Night Service, and follow the procedure
below.
1. Call in on a line answered by the Automated Attendant Service.
2. Check the system response.
— Immediate, Automated Attendant Service should answer the call on
— Delayed, Automated Attendant Service should answer the call after the
3. Listen for the Menu Prompt.
4. After the prompt, choose an option from the menu.
5-2
Issue 1 August 1998
For the PARTNER ACS Release 3.0 or later: The Automated
Attendant Service should answer on the appropriate number of
rings (0 to 6 rings).
For all other systems: If the system is set for
the second ring.
fourth ring.