Changing The System Manager's Password - Lucent Technologies PARTNER Voice Messaging PC Card Release 2 Installation And Programming

Changing the System Manager's Password

Changing the System Manager's
Password
This section tells you how to change the System Manager's password (for
mailbox 0). The factory-set password for mailbox 0 is 1234. To prevent
unauthorized programming of the system, you should change the default
password immediately after installation. You must assign four digits for a
password. It is recommended that you create a password from random,
nonsequential digits.
You cannot reinitialize the System Manager's password. If you change the
password and forget it, you can contact the National Customer Care Center at 1
800 628-2888 or call your Lucent Technologies Representative or local
Authorized Dealer for assistance.
To change the password for mailbox 0:
1. Log into System Administration according to the appropriate procedure.
2. Press 5 to change the password.
The prompt asks you to enter your new password and press #.
3. Enter four digits for the new password and press #.
The prompt asks you to re-enter your new password.
4. Re-enter your new password and press #.
The new password is now active.
Issue 1 August 1998
4-11