Programming - Lucent Technologies PARTNER Voice Messaging PC Card Release 2 Installation And Programming

Programming

This chapter provides the following information:
Initial settings for the communications system and PARTNER Voice
Messaging when the PARTNER Voice Messaging PC Card is installed
General instructions for programming PARTNER Voice Messaging
followed by instructions for changing the initial PARTNER Voice
Messaging settings
The order of the procedures in this section enables you to program the
Automated Attendant Selector Codes, record the Automated Attendant Menu
Prompt, and change the assignments for the mailboxes before PARTNER Voice
Messaging begins to handle calls—this order is recommended to ensure that
calls are handled correctly for the subscribers who require voice mail coverage.
You should have all completed voice messaging system and communications
system planning forms available for reference.
In the following step-by-step instructions, note that Step 1 of each procedure for
the voice messaging system is logging into PARTNER Voice Messaging.
However, if you are already logged into PARTNER Voice Messaging, you can skip
Step 1. When you complete programming, perform the system programming
verification procedures in Chapter 5.
4
Issue 1 August 1998
4-1