Table of Contents
Advertisement
Programming
VMS Hunt Delay (#506) - PARTNER
ACS Release 3.0 or later
Check Form A, Page 2, VMS Hunt Delay. If the default setting is changed, follow
the procedure below.
To specify the VMS Hunt Delay for the appropriate number of rings (a value from
0 to 6) as specified on Form A, Page 2:
1. Press #506.
2. Enter Day ( 1 ) or Night ( 2 ).
3. Enter the line number.
4. Press D until the appropriate value displays.
5. To program another line, press n or p until the appropriate line
number displays.
6. Press D until the appropriate value displays.
7. Repeat Steps 4 and 5 as necessary.
VMS Hunt Delay (#506) - All Other
Communications Systems
Check Form A, Page 2, VMS Hunt Delay. If Delayed is specified, follow the
procedure below.
To change the VMS Hunt Delay from the factory setting of Immediate (that is, 2
rings) to Delayed as specified on Form A, Page 2:
1. Press #506.
2. Press D until the appropriate value displays.
4-18
Issue 1 August 1998
Advertisement
Table of Contents
