Centralized Telephone Programming
Do Not Disturb (F01)
Used in conjunction with either automatic VMS cover or manual VMS cover, this
button lets a subscriber send calls immediately to his or her mailbox (instead of
ringing the extension first).
To program a Do Not Disturb (DND) button as specified on Form C:
1. Press f00ssc.
2. Enter the number of the extension to be programmed.
3. Press a programmable button with lights.
4. Press f01.
5. At this point, do one of the following:
— Go to Step 3 of the next procedure to program another button for
— Press c and go to Step 2 of any button programming
— Press f00 to exit.
Voice Mailbox Transfer (F14)
This button lets any system user transfer calls directly to a PARTNER Voice
Messaging mailbox without ringing the associated extension first.
To program a Voice Mailbox Transfer (VMBox) button as specified on Form C:
1. Press f00ssc.
2. Enter the number of the extension to be programmed.
3. Press a programmable button.
4. Press f14.
5. At this point, do one of the following:
— Go to Step 3 of the next procedure to program another button for
— Press c and go to Step 2 of any button programming
— Press f00 to exit.
this extension.
procedure in this section to program a button for a different
extension.
this extension.
procedure in this section to program a button for a different
extension.
Issue 1 August 1998
4-21