Table of Contents
Advertisement
VMS Hunt Schedule (#507) - PARTNER ACS Release
3.0 or later
VMS Hunt Schedule (#507) -
PARTNER ACS Release 3.0 or later
Check Form A, Page 2, VMS Hunt Schedule. If Day Only or Night Only is
selected, follow the procedure below. The factory setting is Always.
To change the VMS Hunt Schedule setting:
1. Press #507.
2. At the Line: prompt, enter the first line number.
3. Press D until the appropriate value displays.
4. To program another line, press n or p until the appropriate line
number displays.
5. Press D until the appropriate value displays.
6. Repeat Steps 4 and 5 as necessary.
VMS Hunt Schedule (#507) - All Other
Communications Systems
Check Form A, Page 2, VMS Hunt Schedule. If Day Only or Night Only is
selected, follow the procedure below. The factory setting is Always.
To change the VMS Hunt Schedule setting:
1. Press #507.
2. Press D until the appropriate value displays.
Issue 1 August 1998
4-19
Advertisement
Table of Contents
