Table of Contents
Advertisement
Programming
3. Do one of the following:
— Enter the two-digit number of the mailbox you want to initialize.
— Press *7 to return to the Programming Main Menu without making
Reinitializing a Password
If a subscriber forgets the password for his or her mailbox, you can reinitialize the
password to the factory-set password of 1234 so the user can retrieve
messages. Remind the subscriber to change the password immediately after
logging in for the first time.
NOTE:
You cannot use this procedure to reinitialize the System Manager's
password for mailbox 0. If you change the System Manager's password
and forget it, you can contact the National Customer Care Center at
1 800 628-2888 or call your Lucent Technologies Representative or local
Authorized Dealer for instructions for how to reset the password.
To reinitialize a password to 1234:
1. Log into System Administration according to the appropriate procedure.
2. Press 7.
3. Enter the mailbox number to reinitialize a password.
The system plays: "The password has been reinitialized."
Reviewing Mailbox Assignments
You may want to review mailbox assignments, particularly if they have been
changed from the factory default. If you want to change a mailbox assignment,
see "Assigning a Mailbox to an Extension," earlier in this chapter. When you
review the mailbox assignments, make sure that they are correctly indicated on
Form 1.
To review the mailboxes that have been assigned to extensions:
1. Log into System Administration according to the appropriate procedure.
2. Press 1 to review the mailbox assignments.
3. Enter the two-digit number of a mailbox (01 to 04).
The system plays the current assignment for this mailbox.
4. Press *# to exit without changing the mailbox assignment.
5. Repeat Steps 2 through 4 to review other mailbox assignments.
4-10
Issue 1 August 1998
The system plays: "Reinitialized."
changes.
Advertisement
Table of Contents
