Line Coverage Extension (#208); Music On Hold (#602); Night Service (#503) - Lucent Technologies PARTNER Voice Messaging PC Card Release 2 Installation And Programming

Table of Contents

Line Coverage Extension (#208)

To assign line coverage for the extension numbers specified in the VMS-Mail

column on Form A, Page 1, Line Coverage:

1. Press #208.

2. At the Line: prompt, enter the first line for which an extension is specified

in the VMS-Mail column of Form A, Page 1, Line Coverage.

3. At the Data: prompt, enter the number of the extension specified in the

VMS-Mail column.

4. To program another line, press n or p until the appropriate line

number displays.

5. Repeat Steps 3 and 4 for each VMS-Mail line for which an extension

number is written on Form A.

If desired, program Music On Hold. See the Programming and Use guide for the

communications system for instructions.

Check Form C for extension 10. If a Night Service button is specified, follow the

procedure below.

To program Night Service on a button with lights at extension 10 as specified on

Form C:

1. Press #503.

2. At this point, do one of the following:

— If you want to assign Night Service to the first available button on

the system phone, press D until the display reads:

Night Service

1 Assigned-Ext10

Go to Step 3.

Issue 1 August 1998

4-15

Table of Contents

Do you have a question about the PARTNER Voice Messaging PC Card Release 2 and is the answer not in the manual?