Vms Hunt Group Extensions (#505); Automatic Extension Privacy (#304) - Lucent Technologies PARTNER Voice Messaging PC Card Release 2 Installation And Programming

Table of Contents

VMS Hunt Group Extensions (#505)

You must program this feature first before programming any other feature.

You must use this procedure to assign extensions 78 and 79 associated with

PARTNER Voice Messaging to Hunt Group 7.

To assign voice messaging system extensions 78 and 79 to Hunt Group 7:

1. Press #505.

2. At the Group: prompt, press 7.

3. At the Extension: prompt, enter 78 for the first extension number

assigned to PARTNER Voice Messaging as shown on form B1.

4. Press D until the display reads 1 Assigned.

5. Press n to display extension 79 (the second extension number

assigned to PARTNER Voice Messaging as shown on form B1).

6. Press D until the display reads 1 Assigned.

If VMS Hunt Delay is set to Immediate, use this procedure to prevent users from

accidentally picking up calls sent to the voice messaging system.

To set Automatic Extension Privacy (#304) to Assigned for the PARTNER Voice

Messaging system extensions 78 and 79 specified on Form B1:

1. Press #304.

2. Enter 78 .

3. Press D until the display reads 1 Assigned.

4. Press n until the next PARTNER Voice Messaging system extension

number (that is, 79) specified on Form B1 displays.

5. Press D until the display reads 1 Assigned.

Issue 1 August 1998

4-13

Table of Contents

Do you have a question about the PARTNER Voice Messaging PC Card Release 2 and is the answer not in the manual?