Table of Contents
Advertisement
Programming
Centralized Telephone Programming
Before you begin, locate Form C of the System Planner for the communications
system. Be sure you have a copy of the form for each subscriber's phone. Use
this section to program buttons on subscribers' phones, including the
receptionist's phone. When you are finished programming, be sure to label all
buttons on subscribers' phones.
Manual VMS Cover (F15)
This button allows the subscriber to turn voice mail coverage on and off.
To program a VMS Cover button as specified on Form C:
1. Press f00ssc.
2. Enter the number of the extension to be programmed.
3. Press a programmable button with lights.
4. Press f15.
5. At this point, do one of the following:
— Go to Step 3 of the next procedure to program another button for
— Press c and go to Step 2 of any button programming
— Press f00 to exit.
4-20
Issue 1 August 1998
this extension.
procedure in this section to program a button for a different
extension.
Advertisement
Table of Contents
