Setting In The Intelligent Device Station - Mitsubishi Electric MELSEC iQ-R Series User Manual

Setting in the intelligent device station

Connect the engineering tool to the remote head module of the intelligent device station and set parameters.
1.
Create the project with the following settings.
[Project]  [New]
2.
Set "Network Required Setting" of "CPU Parameter" of the remote head module as shown below.
[Navigation window]  [Parameter]  [RJ72GF15-T2]  [CPU Parameter]  [Network Required Setting]
3.
Add the temperature input module with the following settings.
[Navigation window]  [Parameter]  [Module Information]  Right-click  [Add New Module]
Appendix 5 Operation Examples of When the Remote Head Module Is Mounted
A
APPX
177