Mitsubishi Electric MELSEC iQ-R Series User Manual page 143

CH1 Alert output setting (Rate alarm)
Set whether to enable or disable the alert output of the rate alarm.
For details on the alert output function, refer to the following.
Page 27 Alert Output Function
Setting value
0
1
Setting a value other than the above causes an alert output setting (Rate alarm) range error (error code: 1B8H).
■Buffer memory address
The following shows the buffer memory address of this area.
Buffer memory name
CH Alert output setting (Rate alarm)
■Enabling the setting
Turn on and off 'Operating condition setting request' (Y9) to enable the setting.
■Default value
The default value is Disable (1) for all the channels.
Alert output setting [Q compatible mode]
When the Q compatible mode function is used, set whether to enable or disable the alert output of process alarms and rate
alarms.
b15 b14 b13 b12 b11 b10 b9
CH8 CH7 CH6 CH5 CH4 CH3 CH2
(2)
(1) 0: Process alarm enabled, 1: Process alarm disabled
(2) 0: Rate alarm enabled, 1: Rate alarm disabled
■Buffer memory address
The following shows the buffer memory address of this area.
Buffer memory name
Alert output setting (Process alarm)/Alert output
setting (Rate alarm)
■Enabling the setting
Turn on and off 'Operating condition setting request' (Y9) to enable the setting.
■Default value
The default value is Disable (1) for all the channels.
CH1 CH2
513 713
b8 b7 b6 b5 b4 b3 b2
CH1 CH8 CH7 CH6 CH5 CH4 CH3
(1)
CH1 CH2
46
Setting content
Enable
Disable
CH3 CH4 CH5
913 1113 1313
b1 b0
CH2 CH1
CH3 CH4 CH5
CH6 CH7 CH8
1513 1713 1913
CH6 CH7 CH8
APPX
Appendix 3 Buffer Memory Areas
A
141