Mitsubishi Electric MELSEC iQ-R Series User Manual page 123

Level data 0 to 9
This area stores data to be monitored when a level trigger of the logging function is used. Ten types of data are available:
'Level data 0' (Un\G90) to 'Level data 9' (Un\G99). These are useful, for example, to generate triggers while monitoring the
values of devices other than the temperature input module.
For details on the logging function, refer to the following.
Page 40 Logging Function
■Buffer memory address
The following shows the buffer memory address of this area.
Buffer memory name 0
Level data 90
Level data (in Q 1072
compatible mode)
■Setting range
The possible range is from -32768 to 32767.
■Default value
The default value is 0 for all the channels.
Interrupt factor mask [n]
Set Interrupt factor mask to be used.
Setting value
0
1
When 'Interrupt factor mask [n]' (Un\G124 to Un\G139) is changed to Mask clear (Interrupt used) (1) and an interrupt factor
occurs, an interrupt request is sent to the CPU module. When the set value is two or larger, the setting is regarded as Mask
clear (Interrupt used) (1).
"n" indicates an interrupt setting number. (n = 1 to 16)
■Buffer memory address
The following shows the buffer memory address of this area.
Buffer memory name 1
Interrupt factor mask [n] 124
Interrupt factor mask [n] (in Q 4032
compatible mode)
■Default value
The default value is Mask (Interrupt unused) (0) for all the channels.
1 2 3
91 92 93
1073 1074 1075
2 3 4 5 6
125 126 127 128 129
4033 4034 4035 4036 4037
4 5 6
94 95 96
1076 1077 1078
Setting content
Mask (Interrupt unused)
Mask clear (Interrupt used)
7 8 9 10 11
130 131 132 133 134
4038 4039 4040 4041 4042
Appendix 3 Buffer Memory Areas
7 8 9
97 98 99
1079 1080 1081
12 13 14 15 16
135 136 137 138 139
4043 4044 4045 4046 4047
APPX
121
A