Mitsubishi Electric MELSEC iQ-R Series User Manual page 172

CH1 Logging data
This area stores the data logged by the logging function.
Up to 1000 points of data can be stored per channel. After the number of stored data points reaches 1000, data collection
continues with the data overwritten from the head.
For details on the logging function, refer to the following.
Page 40 Logging Function
■Buffer memory address
The following shows the buffer memory address of this area.
Buffer memory name
CH Logging data
CH Logging data (in Q compatible mode)
• Turning off and on 'Operating condition setting request' (Y9) allows the logging data in all the channels to be
cleared.
• Turning on and off Logging hold request while Logging hold flag is on allows logging to resume. In this case,
the logged data is not cleared.
APPX
170
Appendix 3 Buffer Memory Areas
CH1 CH2 CH3
10000 to 11000 to 12000 to
10999 11999 12999
5000 to 6000 to 7000 to
5999 6999 7999
CH4 CH5 CH6
13000 to 14000 to 15000 to
13999 14999 15999
8000 to 9000 to 10000 to
8999 9999 10999
CH7 CH8
16000 to 17000 to
16999 17999
11000 to 12000 to
11999 12999