Mitsubishi Electric MELSEC iQ-R Series User Manual page 170

CH1 Offset/gain setting mode
Specify the channel where the offset/gain setting is adjusted.
• Offset/gain setting mode (offset specification): Channel to adjust the offset
• Offset/gain setting mode (gain specification): Channel to adjust the gain
Setting
0
1
Set either the offset specification or the gain specification to Setting channel (1), and the other to Disable (0). Setting a value
other than 0 and 1 causes an offset/gain setting channel range error (error code: 1E8H).
Multiple channels can be set at the same time. In that case, set the offset specification and gain specification separately. The
offset specification and gain specification cannot be set at the same time.
In the following cases, an offset/gain setting channel specification error (error code: 1E50H) occurs.
• When both the offset specification and gain specification of the same channel are set to Setting channel (1)
• When Disable (0) is set for all channels
• When both the offset specification and gain specification of multiple channels are set to Setting channel (1) at the same
time
■Buffer memory address
The following shows the buffer memory address of this area.
Buffer memory name
CH Offset/gain setting mode (offset specification)
CH Offset/gain setting mode (gain specification)
■Enabling the setting
Turn off and on 'Channel change request' (YB).
■Default value
The default value is Disable (0) for all the channels.
APPX
168
Appendix 3 Buffer Memory Areas
Setting content
Disable
Setting channel
CH1 CH2 CH3
4132 4134 4136
4133 4135 4137
CH4 CH5 CH6
4138 4140 4142
4139 4141 4143
CH7 CH8
4144 4146
4145 4147