Restrictions on a module-specific backup parameter
The data cannot be backed up and restored with a module-specific backup parameter under the following conditions.
• A module other than a Process CPU is used as a control CPU.
• A temperature input module is replaced with the programmable controller being powered off.
• "Auto restore of Offset/gain setting with the module change" of [Module Parameter] is set to "Disable".
Under these conditions, save and restore offset/gain values with the following methods.
Page 69 When a module-specific backup parameter is not used
1 FUNCTIONS
68
1.14 Backing up, Saving, and Restoring Offset/Gain Values