Mitsubishi Electric MELSEC iQ-R Series User Manual page 154

CH1 Post-trigger logging points
Set a number of data points collected for the time period from the occurrence of a hold trigger to the logging stop.
For details on the logging function, refer to the following.
Page 40 Logging Function
■Buffer memory address
The following shows the buffer memory address of this area.
Buffer memory name
CH Post-trigger logging points
CH Post-trigger logging points (in Q
compatible mode)
■Setting range
The possible range is from 1 to 1000.
Setting a value out of the range causes a post-trigger logging points setting range error (error code: 1D4H). Logging cannot
be performed.
When 'CH1 Logging enable/disable setting' (Un\G535) is set to Disable (1), the setting for 'CH1 Post-trigger logging points'
(Un\G539) is ignored.
■Enabling the setting
Turn on and off 'Operating condition setting request' (Y9) to enable the setting.
■Default value
The default value is 500 for all the channels.
CH1 Level trigger condition setting
Set the condition for the occurrence of a hold trigger when using the level trigger in the logging function.
To use the level trigger, set Level trigger condition setting to either level of Level trigger (condition: Rise) (1), Level trigger
(condition: Fall) (2), or Level trigger (condition: Rise and fall) (3).
For details on the logging function, refer to the following.
Page 40 Logging Function
Setting value
0
1
2
3
Setting a value other than the above causes a level trigger condition setting range error (error code: 1D5H).
■Buffer memory address
The following shows the buffer memory address of this area.
Buffer memory name
CH Level trigger condition setting
CH Level trigger condition setting (in Q
compatible mode)
■Enabling the setting
Turn on and off 'Operating condition setting request' (Y9) to enable the setting.
■Default value
The default value is Disable (0) for all the channels.
APPX
152
Appendix 3 Buffer Memory Areas
CH1 CH2 CH3
539 739 939
1048 1049 1050
Setting content
Disable
Level trigger (condition: Rise)
Level trigger (condition: Fall)
Level trigger (condition: Rise and fall)
CH1 CH2 CH3
540 740 940
1056 1057 1058
CH4 CH5 CH6
1139 1339 1539
1051 1052 1053
CH4 CH5 CH6
1140 1340 1540
1059 1060 1061
CH7 CH8
1739 1939
1054 1055
CH7 CH8
1740 1940
1062 1063