Mitsubishi Electric MELSEC iQ-R Series User Manual page 165

CH1 Range setting (offset/gain setting)
This area is used to set up the offset/gain setting.
Setting value
0
1
Setting a value other than the above causes a range setting range error (error code: 190H).
■Buffer memory address
The following shows the buffer memory address of this area.
Buffer memory name
CH Range setting (offset/gain setting)
■Enabling the setting
Turn on and off 'Operating condition setting request' (Y9) to enable the setting.
■Default value
The default value is Factory default setting (0) for all the channels.
Range setting (offset/gain setting) [Q compatibility]
With the Q compatible mode function used, offset/gain values, which are set in the input range setting, can be checked.
b15 b14 b13 b12 b11 b10 b9
0 0 0 0 0 0 0
(2)
(1) 0: Factory default setting, 1: User range setting
(2) The values of b8 to b15 are fixed to 0.
■Buffer memory address
The following shows the buffer memory address of this area.
Buffer memory name
Range setting (offset/gain setting)
The setting values in the offset/gain setting are the same as those of R mode.
■Enabling the setting
Turn on and off 'Operating condition setting request' (Y9) to enable the setting.
■Default value
The default value is Factory default setting (0) for all the channels.
CH1 CH2
599 799
b8 b7 b6 b5 b4 b3 b2
0 CH8 CH7 CH6 CH5 CH4 CH3 CH2
(1)
CH1 CH2
404
Description
Factory default setting
User range setting
CH3 CH4 CH5
999 1199 1399
b1 b0
CH1
CH3 CH4 CH5
CH6 CH7 CH8
1599 1799 1999
CH6 CH7 CH8
APPX
Appendix 3 Buffer Memory Areas
A
163