Setting From Gx Developer; Intelligent Function Module Detailed Setting - Mitsubishi Electric QD62 User Manual

4 SETUP AND PROCEDURE BEFORE STARTING THE OPERATION

4.5 Setting from GX Developer

4.5.1 Intelligent function module detailed setting

4 - 14
This section explains the GX Developer settings required to operate the QD62(E/D).
Sets an external output method for the CPU stop error and a programmable controller
CPU operation method for the QD62 (E/D) error detection.
1) Double-click "PLC parameter" in the project window in GX
Developer.
2) Click the "I/O assignment" tab.
3) Set the following items for the slot where the QD62(E/D) is
mounted, and then click Detailed setting.
Type
Model
Points
Start XY
Item
Select "Intelli.".
Enter the model name of the module.
Select "16points".
Enter the start I/O number of the QD62(E/D).
MELSEC-Q
Description
4 - 14