Mitsubishi Electric MELSEC iQ-R Series User Manual page 177

4.
Add the master/local module with the following settings.
[Navigation window]  [Parameter]  [Module Information]  Right-click  [Add New Module]
5.
Click the [OK] button in the following window to add the module labels of the master/local module.
6.
Set "Required Settings" of the module parameter of the master/local module as shown below.
[Navigation window]  [Parameter]  [Module Information]  [RJ71GF11-T2]  [Required Settings]
Appendix 5 Operation Examples of When the Remote Head Module Is Mounted
A
APPX
175