Primary Transfer Roller - Sharp MX-2314N Service Manual

c. Primary transfer belt drive roller, Primary transfer belt
follower roller
1) Clean the primary transfer belt drive roller, and the primary
transfer belt follower roller.
d. Primary transfer belt tension roller, Registration backup
roller
1) Clean the primary transfer belt tension roller, registration
backup roller.
e. Y auxiliary roller, PTC backup roller
1) Clean the Y auxiliary roller, and the PTC backup roller.
MX-3114N DISASSEMBLY AND ASSEMBLY 10 – 35
f. Primary transfer roller
1) With the front section of the primary transfer unit slightly lifted,
rotate the transfer lock cam knob counterclockwise so that it is
at the angle shown in the figure.
With the above procedure, the primary transfer roller may be
removed.
Be sure to slightly lift the front section of the primary transfer
unit when rotating the transfer lock cam knob. If not, a stress is
applied to the standard reflection plate lever, causing a trouble.
2) Release the lock of the bearing, and remove the bearing and
the primary transfer roller.
2
2
1
3) With the front section of the primary transfer unit slightly lifted,
return the transfer lock cam knob to the neutral angle.
1
1
1
2
2