Sharp MX-2314N Service Manual page 251

67
67-17
Purpose Reset
Function (Purpose) Printer reset
Section Printer
Operation/Procedure
1) Press [EXECUTE] key.
2) Press [YES] key.
The set data related to the printer are initialized. (Including the
NIC setting.)
When the operation is completed, [EXECUTE] key returns to the
normal display.
67-24
Purpose Adjustment/Setup
Function (Purpose) Printer color balance adjustment (Auto
adjustment)
Section Printer
Operation/Procedure
1) Press [EXECUTE] key.
The color patch image (adjustment pattern) is printed out.
2) Plate the printed adjustment pattern on the document table,
select [FACTORY] or [SERVICE] mode.
3) Press [EXECUTE] key.
The printer color balance auto adjustment is performed, and
the adjustment result is printed.
4) Press [OK] key.
The halftone correction target registration is processed.
67-25
Purpose Adjustment/Setup
Function (Purpose) Printer color balance adjustment (Manual
adjustment)
Section Printer
Operation/Procedure
1) Select an adjustment target color with [K][C][M][Y] keys on the
touch panel.
2) Select a target adjustment density level with scroll key on the
touch panel.
3) Enter the set value with 10-key.
* When the key is pressed, the setting value of each
item can be changed with 1up (1down) collectively.
4) Press [OK] key. (The set value is saved.)
When the adjustment value is increased, the image density is
increased, and vice versa.
When [EXECUTE] key is pressed, the check pattern in printed in
the color balance and density corresponding to the adjustment
value.
A POINT1
B POINT2
C POINT3
D POINT4
E POINT5
F POINT6
G POINT7
H POINT8
I POINT9
J POINT10
K POINT11
L POINT12
M POINT13
N POINT14
O POINT15
P POINT16
Q POINT17
67-26
Purpose
Function (Purpose) Used to set the target color balance of the
Section
Operation/Procedure
1) Select the target color balance with the touch panel.
Item/Display
Target
value
table
select
MX-3114N SIMULATION 6 – 118
Item/Display Setting range
1 - 999
1 - 999
1 - 999
1 - 999
1 - 999
1 - 999
1 - 999
1 - 999
1 - 999
1 - 999
1 - 999
1 - 999
1 - 999
1 - 999
1 - 999
1 - 999
1 - 999
Adjustment/Setup
printer mode auto color balance adjust-
ment.
Printer
Content
DEF1 The engine color balance adjustment
target in the automatic color balance
operation is slightly shifted to Magenta.
When this target is selected, the color
balance is converted into natural gray
color balance by the color table in an
actual printer mode and print is made.
DEF2 The engine color balance adjustment
target in the automatic color balance
operation is slightly shifted to natural gray
color balance. When this target is
selected, the color balance is slightly
shifted to Cyan by the color table in an
actual copy mode and print is made.
DEF3 The engine color balance adjustment
target in the automatic color balance
operation is slightly shifted to Cyan. When
this target is selected, the color balance is
converted into the color balance with
enhanced Cyan by the color table in an
actual copy mode and print is made.
Default value
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
Default
value
DEF 1