Right Door Unit; Paper Exit Unit - Sharp MX-2314N Service Manual

(3) Right door unit

1) Open the right door. Remove the gear, and remove the right
door.
3
2
1
3
(4) Fusing rear unit
1) Remove the fusing unit.
2) Remove the fusing rear unit.
2

(5) Paper exit unit

1) Remove the front cabinet upper.
2) Remove the paper exit tray.
3) Remove the paper exit unit.
4
3
1
MX-3114N DISASSEMBLY AND ASSEMBLY 10 – 14
When connecting the paper exit unit connector, rotate the harness
one turn clockwise as shown in the figure below so that the harness
faces toward the arrow A, and connect the connector.
This procedure is necessary for preventing the paper exit sensor
from disconnecting by contact with the harness.