Sharp MX-2314N Service Manual page 165

26-8
Purpose Setting
Function (Purpose) Counter mode setting (Long scale)
Section
Operation/Procedure
1) Select a setting item with the scroll key.
2) Enter the set value with 10-key.
1 = 1 count up, 2 = 2 count up
3) Press [OK] key.
Item/Display Content
A TOTAL(B/W) Long scale (Small)
LONG Total counter (B/W)
SIZE(S)
B TOTAL Long scale (Small)
(COL) LONG Total counter (Color)
SIZE(S)
C MAINTE Long scale (Small)
(B/W) LONG Maintenance
SIZE(S) counter (B/W)
D MAINTE Long scale (Small)
(COL) LONG Maintenance
SIZE(S) counter (Color)
E DEV(B/W) Long scale (Small)
LONG Developer counter
SIZE(S) (B/W)
F DEV(COL) Long scale (Small)
LONG Developer counter
SIZE(S) (color)
G TOTAL(B/W) Long scale (Large)
LONG Total counter (B/W)
SIZE(L)
H TOTAL Long scale (Large)
(COL) LONG Total counter (Color)
SIZE(L)
I MAINTE Long scale (Large)
(B/W) LONG Maintenance
SIZE(L) counter (B/W)
J MAINTE Long scale (Large)
(COL) LONG Maintenance
SIZE(L) counter (Color)
K DEV(B/W) Long scale (Large)
LONG Developer counter
SIZE(L) (B/W)
L DEV(COL) Long scale (Large)
LONG Developer counter
SIZE(L) (color)
Long Scale (Small) : 631 - 1050mm
Long Scale (Large) : 1631 - 1200mm
26-10
Purpose Setting
Function (Purpose) Used to set the trial mode of the network
scanner.
Section
Operation/Procedure
1) Enter the set value with 10-key.
2) Press [OK] key.
The set value in step 1) is saved.
TRIAL MODE 0
(0: YES 1: NO)
1
Default
Setting Default
value
range value
(Taiwan)
1 - 10 3 2
1 - 10 3 2
1 - 10 3 2
1 - 10 3 2
1 - 10 3 2
1 - 10 3 2
1 - 10 5 2
1 - 10 5 2
1 - 10 5 2
1 - 10 5 2
1 - 10 5 2
1 - 10 5 2
Trial mode setting
Trial mode cancel (Default)
MX-3114N SIMULATION 6 – 32
26-18
Purpose Setting
Function (Purpose) Used to set Disable/Enable of the toner
save mode operation.
(For the Japan and the UK versions.)
Section
Operation/Procedure
1) Select an item to be set with scroll keys.
2) Enter the set value with 10-key.
3) Press [OK] key.
The set value in step 2) is saved.
Item Display
A COPY 0 Copy toner save mode is inhibited.
1 Copy toner save mode is allowed
B PRINTER 0 Printer toner save mode is inhibited.
1 Printer toner save mode is allowed.
26-30
Purpose Setting
Function (Purpose) Used to set the operation mode corre-
sponding to the CE mark (Europe safety
standards). (For slow start to drive the fus-
ing heater lamp)
Section
Operation/Procedure
1) Enter the set value with 10-key.
0 Control allowed
1 Control inhibited
2) Press [OK] key.
The set value in step 1) is saved.
* Even in Enable state, the control may not be executed due
to the power frequency, etc.
U.S.A 1 (CE not supported)
CANADA 1 (CE not supported)
INCH 1 (CE not supported)
JAPAN 1 (CE not supported)
AB_B 1 (CE not supported)
26-32
Purpose Setting
Function (Purpose) Used to set the specifications of the fusing
cleaning operation.
Section Fusing
Operation/Procedure
1) Enter the set value with 10-key.
Enable/Disable of the user fusing cleaning function is set.
2) Press [OK] key.
Item/Display Content
A CLEANIN User fusing cleaning
G PRINT function is Enable.
SET
User fusing cleaning
function is Disable.
Default
Content
value
0
0
EUROPE 0 (CE supported)
U.K. 0 (CE supported)
AUS. 0 (CE supported)
AB_A 0 (CE supported)
CHINA 0 (CE supported)
Default
Setting range
value
0 YES 0(YES)
1 NO