Sharp MX-2314N Service Manual page 135

Standby for entry of SIM
sub code
Enter SIM sub code with
the 10-key.
Press the START key.
If there is no item.
The display is made according
to the selected mode and the item.
START (Copy mode)
Press the Program key.
Press the asterisk (*) key.
Press the clear key.
Press the Program key.
Standby for entry of
SIM code.
Enter the main code of
SIM with the 10-key.
The main code of SIM
is displayed.
Press the START key.
YES
Is there a sub code ?
NO
Select the mode and the
item with the scroll key
and the item key.
YES
Operation check ?
NO
Operation is made according
to the selected mode and item.
YES
Operating conditions
check ?
NO
The display is made according to
the selected some and the item.
YES
Data clear ?
NO
Adjustments
YES NO
or setting (counter data
change) ?
Do you
NO
want to change the
content ?
YES
Enter the new setting and
adjustment values.
MX-3114N SIMULATION 6 – 2
Press the SYSTEM
SETTINGS key
YES
simulation main
<Exclusion type>
You have to exit
Press the SYSTEM
simulation mode
SETTINGS key
before entering into
this mode for self
printing type.
NO
to perform another
Press the EXECUTE key
and OK key.
want to end the
Press the EXECUTE key
and OK key.
Press the EXECUTE key
and OK key.
The selected mode and
the item are cleared.
Operation is made according
to the selected mode and the item.
(Other modes)
The changed content
Press the EXECUTE key
and OK key.
NO
Is it the same
code?
In the power OFF/ON type
simulation, OFF/ON
message is
displayed by the
SYSTEM
SETTINGS key.
YES
Do you want
simulation ?
The simulation mode
is canceled.
NO
Do you
YES
Press the clear all key.
simulation ?
is stored.