Sharp MX-2314N Service Manual page 170

27
27-1
Purpose Setting
Function (Purpose) Used to set non-detection of communica-
tion error (U7-00) with RIC. (FSS function)
Section
Operation/Procedure
1) Enter the set value with 10-key.
0 Not detection
1 Detection
2) Press [OK] key.
The set value in step 1) is saved.
27-2
Purpose Setting
Function (Purpose) Used to set the sender's registration num-
ber and the HOST server telephone num-
ber. (FSS function)
Section
Operation/Procedure
1) Select an item to be set with touch panel.
[USER FAX NO] [SERVA TEL NO]
2) Enter the set value with 10-key.
3) Press [SET] key.
The set value in step 2) is saved.
USER FAX_NO. Sender registration number (Max. 16 digits)
SERVA TEL_NO. Host server telephone number (Max. 16 digits)
• If the connection process is not completed
normally when registering the FSS, calling to the
HOST may be continuously made every time
when the power is turned ON (from OFF) or
rebooted.
In this case, enter "********" to inhibit calling to the
HOST.
27-4
Purpose Setting
Function (Purpose) Used to set the initial call and toner order
auto send. (FSS function)
Section
Operation/Procedure
1) Select an item to be set with scroll keys.
2) Enter the set value with 10-key.
3) Press [OK] key.
The set value in step 2) is saved.
Item/Display
A FSS MODE NEB1
NEB2
NFB1
NFB2
B RETRY_BUSY
C TIMER(MINUTE)_BUSY
D RETRY_ERROR
E TIMER(MINUTE)_ERROR
F FAX RETRY
Content
Set the FSS MODE Exclusive for send in NE-B mode
Send/Receive in NE-B mode
Exclusive for send in NE-F mode
Send/Receive in NE-F mode
Resend number setting when busy
Resend timer setting (minute) when busy
Resend number setting when error
Resend timer setting (minute) when error
Resend number setting when FAX initial connection
MX-3114N SIMULATION 6 – 37
Setting Default
Remarks
range value
0 - 3 0 1
1
2 For convenience
stores
3 For convenience
stores
0 - 15 2 0: No retry
1 - 15 3
0 - 15 1 0: No retry
1 - 15 1
0 - 15 2 Unit: Number of times