Sharp MX-2314N Service Manual page 226

51
51-1
Purpose Adjustment/Setup
Function (Purpose) Used to adjust the ON/OFF timing of the
secondary transport voltage.
Section
Operation/Procedure
1) Select an adjustment target item with scroll key on the touch
panel.
2) Enter the set value with 10-key.
3) Press [OK] key. (The set value is saved.)
When the adjustment value is decreased, the transfer ON/OFF tim-
ing for the paper is advanced. When the adjustment value is
increased, the timing is delayed.
When the adjustment value is changed by 1, the timing is changed
by about 10ms. The setting range is -490 - +490ms.
Item/Display
A TC2 ON TIMING Secondary transfer voltage ON
timing setting
B TC2 OFF TIMING Secondary transfer voltage OFF
timing setting
51-2
Purpose Adjustment/Setup
Function (Purpose) Used to adjust the contact pressure (deflec-
tion amount) on paper by the main unit and
the RSPF registration roller. (This adjust-
ment is performed when there is a consid-
erable variation in the print image position
on the paper or when paper jams frequently
occur.)
Section
Operation/Procedure
1) Select a target adjustment mode with [SIDE1] or [SIDE2] or
[ENGINE] keys.
2) Select a target item to be adjusted with scroll keys.
3) Enter the set value with 10-key.
4) Press [OK] key. (The set value is saved.)
[RSPF]
Mode Item/Display
A NORMAL_PLAIN_HIGH
B NORMAL_PLAIN_LOW
C NORMAL_THIN_HIGH
D NORMAL_THIN_LOW
SIDE 1
E RANDOM_PLAIN_HIGH
F RANDOM_PLAIN_LOW
G RANDOM_THIN_HIGH
H RANDOM_THIN_LOW
A NORMAL_PLAIN_HIGH_1
SIDE 2
B NORMAL_PLAIN_LOW_1
Default
Content
value
50
60
RSPF front surface document deflection amount
adjustment value (plain paper/high)
RSPF front surface document deflection amount
adjustment value (plain paper/low)
RSPF front surface document deflection amount
adjustment value (thin paper/high)
RSPF front surface document deflection amount
adjustment value (Thin paper/low)
RSPF front surface document deflection amount
adjustment value (plain paper/high)
RSPF front surface document deflection amount
adjustment value (plain paper/low)
RSPF front surface document deflection amount
adjustment value (thin paper/heavy)
RSPF front surface document deflection amount
adjustment value (thin paper/low)
RSPF back surface document deflection amount
adjustment value 1 (plain paper/high)
RSPF back surface document deflection amount
adjustment value 1(plain paper/low)
MX-3114N SIMULATION 6 – 93
Content
-
-
-
-
-
-
-
-
-
-
Setting Default
value value
1 - 99 50
1 - 99 50
1 - 99 50
1 - 99 50
1 - 99 50
1 - 99 50
1 - 99 50
1 - 99 50
1 - 99 50
1 - 99 50