Transport Drive Unit; Fusing Drive Unit - Sharp MX-2314N Service Manual

(2) Transport drive unit

1) Remove the rear cabinet.
2) Open the right door.
3) Remove the ozone filter cover.
4) Remove the duct.
5) Remove the transport drive unit.
4
3
3
1
When the drive section is disassembled, apply screw lock to
the following sections:
Front side
Apply screw lock (0.1g: about two rice grains) between the
bearing and the transport drive frame. (4 positions)
Be careful not to apply screw lock between the bearing and the
drive shaft.
Apply screw
lock to this
position.
3
3
Apply screw
lock to this
position.
Drive Bearing
shaft
MX-3114N DISASSEMBLY AND ASSEMBLY 10 – 16
Rear side
Apply screw lock (0.1g: about two rice grains) between the
bearing and the transport drive frame. (2 positions)
Be careful not to apply screw lock between the bearing and the
drive shaft.
Drive
shaft
Bearing

(3) Fusing drive unit

1) Remove the rear cabinet upper.
2) Remove the rear cabinet.
3) Remove the ROM cover.
4) Remove the FAX unit.
5) Remove the fusing drive unit.
3
4
3
(4) Paper exit drive unit
1) Remove the rear cabinet upper.
2) Remove the rear cabinet.
3) Remove the ROM cover.
4) Remove the FAX unit.
5) Remove the paper exit drive unit.
1
Apply screw
lock to this
position.
2
1
3
2
1
1