Details Of Simulation - Sharp MX-2314N Service Manual

4. Details of simulation

1
1-1
Purpose Operation test/check
Function (Purpose) Used to check the operation of the scanner
(reading) unit and the control circuit.
Section Scanner (reading)
Operation/Procedure
1) Select the operation speed with the touch panel key.
2) Press [EXECUTE] key.
Scanning is once performed at the speed corresponding to the
scan resolution (operation speed).
Item/Display
OC SCAN 300DPI
400DPI
600DPI
1200DPI
1-2
Purpose Operation test/check
Function (Purpose) Used to check the sensors in the scanner
(reading) section and the related circuits.
Section Scanner (reading)
Operation/Procedure
The operating status of the sensor is displayed.
When "MHPS" is highlighted, the scanner unit is in the home posi-
tion.
1-5
Purpose Operation test/check
Function (Purpose) Used to check the operation of the scanner
(reading) unit and the control circuit.
Section Scanner (reading)
Operation/Procedure
1) Select the operation speed with the touch panel key.
2) Press [EXECUTE] key.
Scanning is repeated at the speed corresponding to the scan
resolution (operation speed).
When [EXECUTE] key is pressed, the operation is terminated.
Item/Display
OC SCAN 300DPI
400DPI
600DPI
1200DPI
Operation mode Default value
300DPI 300DPI
(346.0mm/s) (346.0mm/s)
400DPI
(259.5mm/s)
600DPI
(173.0mm/s)
1200DPI
(86.5mm/s)
Operation mode Default value
300DPI 300DPI
(346.0mm/s) (346.0mm/s)
400DPI
(259.5mm/s)
600DPI
(173.0mm/s)
1200DPI
(86.5mm/s)
MX-3114N SIMULATION 6 – 9
2
2-1
Purpose Operation test/check
Function (Purpose) Used to check the operations of the auto-
matic document feeder and the control cir-
cuit.
Section RSPF
Operation/Procedure
1) Select the operation mode and the speed with the touch panel
key.
2) Press [EXECUTE] key.
The RSPF repeats paper feed, transport, and paper exit oper-
ations at the speed corresponding to the scan resolution (oper-
ation speed).
When [EXECUTE] key is pressed, the operation is terminated.
[RSPF]
Item/Display
(SINGLE) 300DPI
400DPI
600DPI
(DOUBLE) 300DPI
400DPI
600DPI
2-2
Purpose Operation test/check
Function (Purpose) Used to check the operations of the sen-
sors and the detectors in the automatic
document feeder section and the control
circuits.
Section RSPF
Operation/Procedure
The operating conditions of the sensors and detectors are dis-
played.
The code names of the sensors and the detectors which are active
are highlighted.
Display
SPED Document sensor
SPPD1 Document transport sensor 1
SPLS1 Paper size detector 1
SPLS2 Paper size detector 2
SOCD RSPF open/close sensor
SPPD2 Document transport sensor 2
SPPD3 Document transport sensor 3
SPPD4 Document transport sensor 4
SCOV RSPF cover open/close detector
SSET SPF installation detection
STMPU SPF stamp UN installation detection
SWD_LEN SPF document guide plate position (Unit: 0.1mm)
SWD_AD SPF document detection volume output AD value
SWD_LEN and SWD_AD are not ON/OFF display.
Operation mode Default value
300DPI 300DPI
(259.5mm/s) (259.5mm/s)
400DPI
(259.5mm/s)
600DPI
(173.0 mm/s)
300DPI 300DPI
(259.5mm/s) (259.5mm/s)
400DPI
(259.5mm/s)
600DPI
(173.0 mm/s)
Content