Sharp MX-2314N Service Manual page 433

Signal name Name
ADUM ADU motor
FUM Fusing motor
HPOS Shifter home positions sensor
(SHPOS)*
OSM Offset motor
POD1 Paper exit detector 1
POD2 Paper exit detector 2
POD3* Paper exit detector 3
POFM Paper exit cooling fan
POFM2 Paper exit cooling fan
POM Paper exit motor
PRTPD* Paper exit tray paper detector
(Right paper exit tray)
TFD2 Paper exit tray full detector
(Face-down tray)
TFD3* Paper exit tray full detector
(Right paper exit tray)
No. Name
1 Transport roller 6 (Drive)
2 Transport roller 6 (Idle)
3 Paper exit roller 1 (Idle)
4 Paper exit roller 1 (Drive)
5 Paper exit roller 2 (Idle)
6 Paper exit roller 2 (Drive)
7 Paper exit gate
8 Switchback gate
Drives the ADU and the transport roller in the right paper exit section.
Drives the fusing section.
Detects the shifter home position.
Offsets (shifts) paper.
Detects paper transport from the fusing section.
Detects paper transport to the face-down paper exit tray.
Detects paper transport to the right paper exit tray.
Cools the fusing section and the paper exit section.
Cools the fusing section and the paper exit section.
Drives the roller in the paper exit section.
Detects paper empty in the paper exit tray (Right paper exit tray).
Detects paper full in the face-down paper exit tray.
Detects paper full in the right paper exit tray.
Transports paper transported from the fusing section to the paper exit section and the switchback section.
Apply a pressure to paper and the transport roller to provide the transport power of the transport roller to
paper.
Apply a pressure to paper and the paper exit roller to provide the transport power of the paper exit roller to
paper.
Transports paper to the left paper exit section.
Apply a pressure to paper and the paper exit roller to provide the transport power of the paper exit roller to
paper.
Discharges paper to the right paper exit tray.
Selects the paper path: to transport paper to the back surface print transport section or to the right tray.
Switchbacks paper to transport it to the back surface print section.
MX-3114N OPERATIONAL DESCRIPTIONS 13 – 13
Function/Operation
Function/Operation