Sharp MX-2314N Service Manual page 231

56-3
Purpose Data backup
Function (Purpose) Used to backup the document filing data to
the USB memory.
Section
Operation/Procedure
1) Insert the USB memory into the main unit.
2) Select a target transfer item with the touch panel.
<IMPORT>
From USB MEMORY DEVICE to EEPROM, SD Card, HDD
<EXPORT>
From EEPROM, SD Card, HDD to USB MEMORY DEVICE
3) Press [EXECUTE] key, and press [YES] key.
Data transfer selected in the procedure 2) is performed.
When the operation is completed normally, "COMPLETE" is
displayed. In case of an abnormal end, "ERROR" is displayed.
56-4
Purpose Data backup
Function (Purpose) Used to backup the JOB log data to the
USB memory.
Section
Operation/Procedure
1) Insert the USB memory into the main unit.
2) Press [JOB LOG EXPORT] key.
3) Press [EXECUTE] key, and press [YES] key.
Data transfer selected in the procedure 2) is performed.
When the operation is completed normally, "COMPLETE" is
displayed. In case of an abnormal end, "ERROR" is displayed.
56-5
Purpose Adjustment/Setting/Operation data check
Function (Purpose) Used to import the SIM22-6 data to a USB
memory in the TEXT format.
Section
Operation/Procedure
1) Insert the USB memory into the main unit.
2) Select a kind of data to be imported.
3) Press [EXECUTE] key, and press [YES] key.
Procedure 2) The selected data are imported.
When the operation is completed normally, "COMPLETE" is
displayed. In case of an abnormal end, "ERROR" is displayed.
56-6
Purpose Operation data check
Function (Purpose) Used to import the SIM23-2 data to a USB
memory in the TEXT format.
Section
Operation/Procedure
1) Insert the USB memory into the main unit.
2) Select a kind of data to be imported.
3) Press [EXECUTE] key, and press [YES] key.
56-7
Purpose
Function (Purpose) Used to import the syslog data to a USB
Section
Operation/Procedure
1) Insert the USB memory into the main unit.
2) Select SYSLOG EXPORT to be imported.
3) Press [EXECUTE] key, and press [YES] key.
56-11
Purpose
Function (Purpose) Copy the SD card data to an option HDD
Section
Operation/Procedure
1) Install an option HDD.
2) Press [EXECUTE] key. and press [YES] key.
The SD card data are copied to the option HDD.
When the operation is completed "COMPLETE" is displayed,
in case of an abnormal end, "ERROR" is displayed.
Note : This simulation function only the 23cpm model without
HDD.
COMPLETE
WARNING
ERROR (HDD ACCESS ERROR)
ERROR (LOW LEVEL BLOCK
WRITE ERROR)
ERROR (LOW LEVEL BLOCK
READ ERROR)
ERROR (NO DATA ADJUSTMENT)
TROUBLE (U2-42)
56-12
Purpose
Function (Purpose) Copy the SD card data to an option HDD.
Section
Operation/Procedure
1) Install the accessory SD card (4GB) to the option HDD kit.
2) Press [EXECUTE] key and press [YES].
The data which were copied to the HDD with SIM56-11 are
copied to the SD card (4GB)
When the operation is completed, "COMPLETE" is displayed,
in case of an abnormal end, "ERROR" is displayed.
Note : This simulation function only for the 23cpm model with
HDD installed.
Result display
COMPLETE
WARNING
NO DATA
ERROR (EXPORT DATA
ILLEGAL)
ERROR (LOW LEVEL BLOCK
READ ERROR)
ERROR (NO DATA
ADJUSTMENT)
ERROR (SD ACCESS ERROR)
MX-3114N SIMULATION 6 – 98
Adjustment/Setting/Operation data check
memory. (For 26/31 cpm machine)
Data copy
MFP PWB/HDD
Result display
Normal completion
HDD unmount
HDD access disable
Write error
Read error
Data discrepancy between the SD
card and the HDD
U2-42 occurrence
Data copy
MFP PWB/HDD
Normal completion
SD/HDD unmount
There are no copy data of the SD
card in the HDD.
SD card data error in the HDD
Read error
Data discrepancy between the SD
card and the HDD
SD card access error
Description
Description