Sharp MX-2314N Service Manual page 245

66
66-1
Purpose Setting
Function (Purpose) Used to display the FAX-related soft SW (2
- 150) on the LCD to allow changing the
soft SW while checking with the LCD.
Section FAX
Operation/Procedure
1) Enter the [SW NO] with 10-key.
* When [C] key is pressed, the entered value of [SW NO] is
cleared.
2) Press [DATA] button.
The soft SW data entered in procedure 1) is displayed.
* When [SW NO] button is pressed, the display returns to the
initial screen.
3) Enter the number corresponding to the bit to be changed with
10-key.
* [1]  [0]
[0]  [1]
4) When [EXECUTE] button is pressed, it is highlighted and the
setting is saved.
After saving the setting, [EXECUTE] button returns to the nor-
mal display.
66-2
Purpose Setting
Function (Purpose) Used to enter a country code and set the
default value for the country code.
Section FAX
Operation/Procedure
1) When the machine enters Simulation 66-02, the following
screen is displayed.
* When [DEST CODE] button is pressed, the display is shifted
to the country code list screen.
* The currently set country code is displayed in the column of
"PRESENT:".
2) Enter the country code (8 digits) with 10-key([0]/[1]). The
entered country code is displayed in the column of "NEW:" and
[SET] key becomes active.
* When [C] key is pressed, the column of "NEW:" is cleared.
3) When [SET] button is pressed after entering the country code,
[EXECUTE] button becomes active. The country code is dis-
played in the column of "PRESENT:", and the column of
"NEW:" is cleared.
4) When [EXECUTE] button is pressed, it is highlighted and
[YES] and [NO] buttons become active. The country name is
displayed on the tile line.
5) When [YES] button is pressed, it is highlighted and the soft SW
corresponding to the country code is initialized.
6) After completion of initialization of the soft SW, [EXECUTE],
[YES], and [NO] buttons become inactive.
Operation/Procedure (Shifting to the country page)
* When [DEST CODE] button is pressed on the initial screen, the
display is shifted to the country code list screen.
Use scroll keys to select the country select page.
<Country code list>
JAPAN
U.S.A.
AUSTRALIA
U.K.
FRANCE
GERMANY
SWEDEN
NEWZEALAND
CHINA
SINGAPORE
TW
MIDDLEANDNEAREAST
SLOVAKIA
OTHER3
FINLAND
NORWAY
DENMARK
NETHERLANDS
ITALY
SWITZERLAND
AUSTRIA
INDONESIA
THAILAND
MALAYSIA
INDIA
PHILIPPINES
HONGKONG
RUSSIA
SOUTHAFRICA
SPAIN
PORTUGUESE
LUXEMBURG
BELGIUM
CZECH
HUNGARY
GREECE
POLAND
BRAZIL
66-3
Purpose
Function (Purpose) Used to check read/write of the EEPROM
Section
Operation/Procedure
1) When the machine enters Simulation 66-03, the following
screen is displayed.
* Select the page of memory check item with the scroll key.
2) When the memory check item button is selected, the display is
shifted to the memory check screen.
3) When [EXECUTE] button is pressed, it is highlighted and the
memory check of the selected item is started.
4) After completion of memory check, [EXECUTE] button returns
to the normal display and the result of memory check is dis-
played.
Memory check status
NO CHECK
CHECKING
OK
NG A##
MX-3114N SIMULATION 6 – 112
00000000
10110101
00001001
10110100
00111101
00000100
10100101
01111110
00100110
10011100
11111110
11111101
11111100
11111011
00111100
10000010
00110001
01111011
01011001
10100110
00001010
01010100
10101001
01101100
01010011
10001001
01010000
10111000
10011111
10100000
10001011
01101001
00001111
00101110
01010001
01000110
10001010
00010110
Operation test/Check
and the SDRAM on the MODEM controller
and display the result.
FAX
No check
During checking
Check complete OK
Check complete NG Error occurring address or data
line is displayed for each item.