Sharp MX-2314N Service Manual page 395

• Drive-type oil roller
1
When assembling the drive-type oil roller, fit the concave
section of the shaft with the convex pawl of the coupling.
2) Remove the spring, and remove the oil applying roller unit.
Place the lower stay so that the oil applying roller unit can be
removed upward.
When attaching the oil applying roller unit, check to confirm
that "R" mark printed on the oil applying roller comes on the
rear side.
1
2
MX-3114N DISASSEMBLY AND ASSEMBLY 10 – 49
• Follower-type oil roller
1
• Drive-type oil roller
1
3
3) Remove the CL roller bearing from the oil applying roller and
the backup roller.
1
1
2
R
R
2
1
2
3