Sharp MX-2314N Service Manual page 239

64
64-1
Purpose Operation test/check
Function (Purpose) Test print. (Self print) (Color mode)
Section
Operation/Procedure
1) Set the print conditions.
Select an item to be print condition with scroll keys.
Set the print conditions with 10-key.
Select a target print color with [K] [C] [M] [Y] key.
2) Press [EXECUTE] key.
The test print (self print) is performed.
Item/Display
A PRINT PATTERN
(1, 2, 9 - 11, 17 - 19, 21, 22)
B DOT1 (DOT1>=2 IF A: 2,11)
C DOT2 (DOT2>=2 IF A: 2,11)
D DENSITY (FIXED "255" IF A: 9)
E MULTI COUNT
F EXPOSURE THROUGH
(2 - 8 IF A: 17 - 19)
CHAR/PIC
CHAR/PRPIC
CHAR
PRINT PIC
PRINT PAPER
MAP
STANDARD DITHER
G PAPER MFT
CS1
CS2
CS3
CS4
LCC
H DUPLEX YES
NO
I PAPER TYPE PLAIN
HEAVY
OHP
ENVELOPE
HEAVY2
GLOSSY
HEAVY3
Print pattern of Item A
Pattern No. Content
1 Grid pattern
2 Dot print
9 Each color 10% area (A4/
A4R) density print
10 8-color belt print
11 4-color dot print (sub scan)
17 All background (halftone)
18 256 gradations pattern
(Other dither)
19 256 gradations pattern
(For text dither)
Content
Specification of the print pattern
(* For details, refer to the description below.)
Setting of print dot number (M parameter)
(Self print pattern: m by n)
Setting of blank dot number (N parameter)
(Self print pattern: m by n)
Used to specify the print gradation.
Number of print
Exposure mode No process (through)
specification
Text/Printed Photo
Text/ Photograph
Text
Printed Photo
Photograph
Map
Dither without correction
Tray selection Manual paper feed
Tray 1
Tray 2
Tray 3
Tray 4
LCC
Duplex print Yes
selection
No
Paper type Standard paper
Heavy paper
OHP
Envelope
Heavy paper 2
Glossy paper
Heavy paper 3
Pattern generating
section
LSU-ASIC • When the print width is 100 or more and all colors are selected, print is made in the
three colors (CMY).
• Print is started at 4mm from the paper lead edge.
• Writing regardless of pound. The first one is fixed to LD1.
-
• Each interval is 41.86mm (989dot).
• If m is not in the range of 1 - 13%, it is rounded.
• K print is started at 17mm from the paper lead edge.
• For every 1/4 of the sub scanning direction paper size, print is made for each color.
• When N=0, print of all the background is made in 4 colors.
Halftone • When all colors are selected, print is made in CMY.
(IMG-ASIC rear
• When all colors are selected, print is made in CMY.
process)
• 16 gradations are printed in the main scanning direction, and feedback is made, and
the next 16 gradations are printed. (16 x 16 patch print)
• Print is started at 5mm from the paper lead edge.
• Print is made from 255 gradations, and 0-254 gradations are printed.
• Print is made from 255 gradations, and 0-254 gradations are printed.
MX-3114N SIMULATION 6 – 106
Setting range
1 - 58 (Printable only 1, 2, 9 - 11, 17 - 19, 21,
22)
1-255
(Pattern 2, 11: 2-255 except above: 1-255)
0-255
(Pattern2, 11: 2-255 except above: 0-255)
1-255
(Pattern 9: 255 Fixed except above:1-255)
1 - 999
1-8
(Pattern 17-19: 2-8
except above:1-8)
1 - 6
0 - 1
1 - 7
NOTE
Default value
1
1
254
255
1
1 8
(STANDARD
2
DITHER)
3
4
5
6
7
8
1 2
(CS1)
2
3
4
5
6
0 1
(NO)
1
1 1
(PLAIN)
2
3
4
5
6
7