Available Models - Fluke OptiView T1/E1 Getting Started Manual

•
Track latency and availability of key network devices
•
Provide bandwidth utilization statistics, including top applications,
conversations, and protocols
•
Provide instant HTML reports for all seven layers of statistics and
problem tracking
•
Feature a dedicated packet capture engine with protocol decoding
available through Fluke Networks Protocol Expert software or
other third-party packet decoder applications.

Available Models

The OptiView T1/E1 and DS3/E3 WAN Analyzers are available in the
following models:
•
OptiView T1/E1 WAN Analyzer: WAN link analyzer for Frame Relay
or Point-to-Point networks. Features full-duplex interfaces for T1,
E1, and Serial WAN link access points.
•
OptiView DS3/E3 WAN Analyzer: WAN link analyzer for Frame
Relay or Point-to-Point networks. Features full-duplex interfaces for
DS3, E3, and HSSI WAN link access points.
•
OptiView T1/E1 WAN Distributed Vision Suite: a bundle that
includes the OPV-WAN/T1E1, OptiView Console, and OptiView
Protocol Expert.
•
OptiView DS3/E3 WAN Distributed Suite: a bundle that includes
OPV-WAN/DS3E3, OptiView Console, and OptiView Protocol Expert.
Contact your nearest Fluke Networks Distributor or Service Center for
purchasing information (see "Contacting Fluke Networks").
OptiView T1/E1 and DS3/E3 WAN Analyzers
Introduction
3