Front Page Main Buttons - Fluke OptiView T1/E1 Getting Started Manual

Front Page Main Buttons

Table 2 summarizes the functions of the main buttons on the
. For detailed information about these buttons, access the online
Page
Help within the remote user interface software.
LMI Status
(Frame Relay only)
Table 2. Front Page Main Buttons
Button
Router
OptiView T1/E1 and DS3/E3 WAN Analyzers
The Remote User Interface
Description
The two Router (DTE and DCE) buttons
represent the near-end and far-end routers.
Each button displays the IP address of the
router and the routing protocol used.
If a routing protocol runs between the two
routers, both Router buttons are available
and you can click either one to view detailed
information about that router.
Provides information for the Link
Management Interface (LMI).
A indicates that the LMI interface is up
and that no problems are currently being
detected. An alerts you that the analyzer
is detecting or has detected errors.
If Current Errors or Previous Errors is
displayed on this button, click it to see the
LMI errors that were detected.
Front
37