Fluke OptiView T1/E1 Getting Started Manual page 35

•
Local Host Software Revision
Displays the revision of the remote user interface software installed
on the PC. If
you need to update the remote user interface software.
•
List of analyzers
Any OptiView analyzer that is in the same local network as your PC
appears in this list. If an analyzer is not in the same local network,
its name appears in the list if you added the PC's IP address to the
analyzer's
Remote Consoles
connected to the analyzer.
The following information is provided for each analyzer:
SNMP Name
Connection
analyzers). To the left of connection type, you may see one of
the following symbols:
Indicates that encryption is disabled on the analyzer (see
"Protecting the Privacy of Your Data").
Indicates that encryption is enabled on the analyzer (see
"Protecting the Privacy of Your Data").
: the analyzer's IP address.
IP Address
OptiView T1/E1 and DS3/E3 WAN Analyzers
appears next to the Local Host Software Revision,
list. It also appears if you recently
: the user-specified name of the analyzer.
: the type of connection (
The Remote User Interface
port for WAN
MANAGEMENT
31