Table of Contents
Advertisement
4. Press
.
Enter
A prompt is displayed that includes the SNMP name of the
analyzer.
5. At the prompt, type
The text
/Management>
that you are in Management Port configuration mode.
6. Type
A.B.C.D E.F.G.H, where A.B.C.D is the
ipaddr
port's IP address and E.F.G.H is the subnet mask. Press
7. Type
A.B.C.D, where A.B.C.D is the IP address of the
iprouter
default router. Press
8. Type
A.B.C.D, where A.B.C.D is the IP address of the
ippridns
primary DNS server. Press
9. (Optional) Type
the secondary DNS server. Press
10. Type
and then press
apply
settings.
11. Type
and then press
show
for the
MANAGEMENT
12. Type
to leave Management Port configuration mode.
exit
OptiView T1/E1 and DS3/E3 WAN Analyzers
management
is appended to the SNMP name to indicate
.
Enter
.
Enter
A.B.C.D, where A.B.C.D is the IP address of
ipsecdns
Enter
to apply the
Enter
. Verify that the IP address settings
Enter
port are correct.
Setting Up the Analyzer
and then press
Enter
MANAGEMENT
.
MANAGEMENT
.
.
Enter
port IP
17
Advertisement
Table of Contents
