Table of Contents
Advertisement
The Front Page
The
Front Page
connect to an analyzer.
The figure below shows the
interface. If your analyzer is configured for a different
interface (for example, Serial), the appropriate
screen is displayed. To configure the appropriate interface
type, see "Specifying the WAN Interface and Physical Layer
Parameters", later in this guide.
(Figure 13) is the first screen that is displayed after you
Note
Front Page
Figure 13. Front Page Screen
OptiView T1/E1 and DS3/E3 WAN Analyzers
The Remote User Interface
screen for a T1
Front Page
awu29s.bmp
35
Advertisement
Table of Contents
