OptiView
Getting Started Guide
The
OptiView Browser
•
Task buttons
Click the buttons (located at the top of the screen) to perform
these tasks:
•
IP address list
Provides an entry field for you to type the IP address of the
OptiView analyzer that you want to connect to. Previously entered
IP addresses are retained in the list so that, alternatively, you can
click the drop-down arrow and select an address.
30
has five main areas:
Re-displays the list of OptiView analyzers. Any analyzer that is
in the same local network appears in this list.
Starts the remote user interface for the selected analyzer.
Starts the Web Browser. (Applies to OptiView Integrated
Network Analyzers only. This button is not available if an
OptiView Workgroup Analyzer or OptiView WAN Analyzer is
selected.)
Updates the selected analyzer's firmware. (Does not apply to
OptiView Integrated Network Analyzers.)