Installation And Connection; Overview Of The Combivert F6; Figure 14: F6 Housing 2 Top View - KEB COMBIVERT F6 Series Instructions For Use Manual

OVerVIeW OF THe cOMbIVerT F6

4 Installation and connection

4.1 Overview of the cOMbIVerT F6
Housing 2
1
5
5a
Figure 14: F6 housing 2 top view
No. Name
Fixing points for the optional shielding
plates. The shielding e.g. from the
motor cable is laid on the mounting
plate in the control cabinet or on the
shielding plates (optionally available).
2a
1 / Control unit:
---
5a •
Power unit:
•
•
LEDs (see the manual for control unit
2 ---
chapter „Overview")
2
For control card COMPACT:
FS without function.
•
3
2a ---
•
Diagnostic interface with RS232/485
interface according to DIN 66019II
3 X4A
protocol /
operator slot
Power circuit terminals for:
•
4 X1A •
•
4
•
Protective earth;
at connection to protective earth
5 PE
each terminal may be assigned only
once.
Description
00F6V80-2000
Built-in version
00F6V80-2001
Push-through version
00F6V80-2002)
For control card COMPACT
FS without function
For control card APPLICATION
and PRO:
Status indication of the safety
module
Mains input
Braking resistor
DC supply
Motor connection
59