Accessories; Connection And Control Elements; Tab. 1 Connector Sets; Tab. 2 Overview Connection And Operating Elements - KEB COMBIVERT F6 Instructions For Use Manual

3 | Product description
NOTICE
3.4 Accessories
3.5 Connection and control elements
14
The certification of drive controllers with safety technology is only valid un-
der the following conditions:
a) The material number corresponds with the numerical code below.
b) The FS logo is printed on the type plate.
Numerical code for F6 COMPACT with safety technology (x=variable):
To be able to use preassembled cables provided by the customer, the connectors
of the control are optionally available. The following connector sets are available
according to the used options:
Control board
COMPACT
Tab. 1: Connector sets
X1C X3A X3B
X2B X2C
X4B
X2A
X4C
Tab. 2: Overview Connection and operating elements
xxF6Kxx-xxxx
Set contains
terminal strip 24-pole
terminal strip 12-pole-ter-
minal strip 8-pole
terminal strip 6-pole
X1C Temperature monitoring,
brake control
X2A Control terminal block for digital
inputs/outputs; 24V output; relay
output
X2B Safety functions;
24V supply,
2 digital outputs
FS ST
X2C CAN bus; analog inputs and out-
puts
X3A Encoder interface channel A
X3B Encoder interface channel B
VCC
X4A Diagnostic interface with
NET ST
RS232/485 interface according
DEV ST
to DIN66019 protocol; operator
OPT
slot
X4B Fieldbus input / Port 0
X4A
X4C Fieldbus output / Port 1
FS ST LED Safety state
VCC LED voltage supply (24V)
X2Z
NET ST LED network / fieldbus status
DEV ST LED inverter/ device status
OPT optional
ma_dr_f6-cu-k-inst-20144795_en
KEB Automation KG
Material number
00F6V80-000K