Figure 15: F6 Housing 2 Front View - KEB COMBIVERT F6 Series Instructions For Use Manual

OVerVIeW OF THe cOMbIVerT F6
Housing 2
8 6
10
5
5a
Figure 15: F6 housing 2 front view
60
7
9
4
Terminal R can alternatively be labeled with PB.
No. Name
Power circuit terminals for:
• Mains input
4 X1A • Braking resistor
• DC supply
• Motor connection
Protective earth;
at connection to protective earth
5 PE
each terminal may be assigned only
once.
Fixing points for the optional shielding
plates. The shielding e.g. from the
motor cable is laid on the mounting
plate in the control cabinet or on the
shielding plates (optionally available).
5a ---
Power unit:
• Built-in version
00F6V80-2001
• Push-through version
00F6V80-2002)
6 X3A Encoder interface channel A
7 X3B Encoder interface channel B
Motor temperature monitoring, brake
8 X1C
control
9 --- Interior fan
10 --- Heat sink fan
Description