Gendex ORTHORALIX 9200 Service Manual page 64

Preventive maintenance
Table of contents
E.1 Introduction
.........................................................................................
E.2 Requirements
......................................................................................
E.3 Maintenance
........................................................................................
E.4 Mechanical checks
............................................................................
E.5 Electrical checks
................................................................................
E.6 Functional checks
.............................................................................
E.7 Measuring list
.....................................................................................
E.7.1 Verify the anodic current
E.7.2 Verify the kv
.......................................................................................................
E.7.3 Verify the dose rate
.....................................................................................
E.7.5 Verify the reproducibility
E.7.7 Verify the earth resistance
E.7.8 Verify the leakage current
Gendex Dental Systems
A-1
A-1
A-2
A-2
A-3
A-5
A-5
A-5
.......................................................................
A-5
A-5
A-5
........................................................................
.......................................................................
................................................................
....................................................................
.....................................................................
Printed on: 20 Apr 2012, 04:59:40 pm; Printed by: UWE.ZELLER
E.1 Introduction
This section gives details about the preventive maintenance of
the Orthoralix systems.
The following pages list all the preventive maintenance actions
and at the end of the Section there is a checklist summarizing the
scheduled time/actions to be performed.
Legenda:
R-S An R before the preventive maintenance in-
struction indicates the need to have an X-ray
exposure: all the adequate precautions must
be taken.
An S before the preventive maintenance instruc-
tion indicates that the instruction concerns a
safety aspect of the machine, installation, etc.
INSTR. TYPE The number written before the preventive
maintenance instruction represents the pre-
ventive maintenance frequency in months (if
not specified in another manner).
Do not move the Z-carriage along the column
when the system is off. Doing so it could damage
the PC6 board.
E.2 Requirements
Cleaning materials:
Lubricants:
E-1
E
(03.0)E