Acceptance
Table of contents
D.1 Introduction
.........................................................................................
D.2 Equipment required
........................................................................
D.3 Standards compliance tests
D.3.2
Tube current accuracy
D.3.3
kV Accuracy
.......................................................................................................
D.3.4
Timer accuracy
...............................................................................................
D.3.5
Radiation dose rate
....................................................................................
D.3.6
Reproducibility
..............................................................................................
........................................................................................
D.3.8
Earth resistance
.............................................................................................
...................................................................................................
D.4 Acceptance checklist
.......................................................................
Gendex Dental Systems 4519-190-71193-7
D-1
D-1
D-1
........................................................
D-1
.....................................................
D-2
.............................................................................
D-2
D-2
D-3
D-3
D-3
D-3
D-3
D-4
Printed on: 20 Apr 2012, 04:59:40 pm; Printed by: UWE.ZELLER
D.1
Introduction
This section explains how to perform the tests that demonstrate
to the customer that the Orthoralix system complies with the
specified standards.
D.2
Equipment required
D.3
Standards compliance tests
1.
Check that the Certification, Identification, Place and Date of
2.
label on the column comply with the specifications.
D-1
D
(03.0)E