Emergency Stop Replacement - Mecmesin Multitest 0.5dV Service And Repair Manual

Multitest 0.5dV, 1dV & 2.5dV
Service and Repair Manual

11. Emergency Stop Replacement

General anti-static precautions should be observed.
NOTE:
50.
Pull off loom connection.
51.
Note the orientation of the switch,
and maintain this orientation on re-
assembly.
49.
52.
53.
Refitting the Emergency Stop button
is the reverse of the above procedure
Number 022-780
Issue Number: 02
Depress the release lug on rear of
Emergency Stop button to release
loom connection - take care -
excessive force can break the lug.
Using a suitable tool unscrew the collar
retaining the Emergency Stop button
and remove completely, enabling the
Emergency Stop to be withdrawn
through the front of the front panel.
Fit replacement Emergency Stop.
Page 14 of 32