5.7 Cutting system
5.7.1 Tool frame
1. Remove the cutting deck. For further instruc-
tions, refer to section "5.7.2 Cutting deck" on
2. Push down the equipment frame and drop the
3. Check the measurement of the adjuster screws'
position. Note the values and use them as initial
values when assembling.
4. Loosen the adjustment screws.
76 – English
5. Remove the left wing cover.
6. Remove the automatic belt tensioner stay.
7. Release the lifting chain from the tool frame.
8. Remove the protecting cover on the tool frame.