Ignition Switch; Hour Meter - Husqvarna P524 Workshop Manual

Electrical system

5.3.7 Ignition switch

Tools
Combination wrench
Torx
Wrench
Dismantling
1. Remove the side cover.
2. Loosen the ignition switch connection from the
circuit board.
3. Remove the ignition key.
4. Dismantle the washer and nut under the ignition
key.
5. Release the ignition switch by pushing it down
through the panel.
Assembling
Assemble in reverse order.
NB!
Make sure the connector goes into the right
position (click lock).
46 – English
Dimension
18 mm / 19 mm??
T30

5.3.8 Hour meter

Tools
Torx
Dismantling
1. Remove the front cover, steering column.
2. Release the cables from the hour meter.
3. Loosen the hour meter by compressing the
bracket and pressing it out through the steering
wheel console.
Assembling
Assemble in reverse order.
Dimension
T30