Hydraulic Tank - Husqvarna P524 Workshop Manual

Hydraulic system

5.6.5 Hydraulic tank

Tools
Torx
Combination wrench
Combination wrench
Combination wrench
Combination wrench
Combination wrench
Dismantling
1. Remove the side cover.
2. Dismantle the right wing cover.
56 – English
Dimension
T30
10 mm
13 mm
14 mm
27 mm
32 mm
3. Remove the protecting cover protecting the right
side of the machine.
4. Place a vessel underneath the hydraulic tank
drain plug.
5. Drain the oil from the hydraulic tank.
6. The hydraulic hoses can be mixed up. Mark the
lines so that they are reconnected on the correct
connections.
7. Clean according to the general instructions, see
section "5.6.1 Hydraulic hygiene" on page 52.
8. Loosen the upper hydraulic hose. Fit sealing
plugs to prevent leakage and contamination.
9. Loosen the tank with two screws.