Husqvarna P524 Workshop Manual page 71

Hydraulic system
12. Lift off the PTO belt from the belt pulley to make
room to prise off the pump belt.
13. Prise off the pump belt from the hydraulic pump
pulley.
14. Lift off the pump belt from the engine pulley and
around the magnetic clutch.
NB!
Take care of the magnetic clutch connection
cable.
15. Remove the pump belt through the front part of
the machine.
16. Assemble in the reverse order.
17. After assembling or adjusting the pump belt, the
hydrostatic cable must be checked. For more
information, refer to section "5.2.9 Hydrostatic
cable" on page 37.
70 – English